|
 |
- Check to see if the type of the lamp is coincident with the automobile.
- Turn off the power supply on both sides of the vehicle to wait for the lamp and the engineer cool down completely.
- Remove the joint ¡¢ back cover of lamp lanterns and original halogen lamp from the car lantern.
- Take out the new HID lighting system from packing box, check every piece of the system carefully, and then install the lamps on the bases in the headlight lanterns.
- Make sure the HID lamps are fixed in good condition in lanterns.
- Connect the input terminal (12V DC) of the stabilizer to the power supply terminal of headlight lanterns, and connect the output terminal of the stabilizer with the connector of the xenon lamp.
- Fix the stabilizer on the proper place with double-side pad, and then fix it with tie wraps.
- Check all the installation procedures, make sure that the connection of electricity polar is correct, and then start the engine of vehicle and turn on the lamp.
- Check the profile ¡¢ height and distance of H/L beam and adjust them to meet with the requirements of traffic regulations.
Note: The user should ask the technician from the retailers to do the installation. Before the installation is over,working with electricity is forbidden.Do not look directly at the light. In addition,as the light tube is very hot,no touch is allowable. As the light is so bright,choose the proper CT according to the local laws or regulations. After sale£¬the company is not bear any responsibilities related. | |
|
